Smart Weighbridge · Go-Live RoadmapDESIGN → FULL SYSTEM ON SITE
From here to a full system running on site
The weighing core is already live at Woestalleen. These are the stages to turn it into a full-fledged on-site system — booms, cameras, the driver Slip App and live data — running locally on site, not as a demo. Each item is tagged who does it: Site (physical/electrical), Geologix (us, software) or both.
Already live on site (commissioned 3–5 Nov 2026): the weighbridge indicator (Toledo-style, COM4) feeds the Scale Reader + watchdog into the Smart Weighbridge console on the site PC — 124 real tickets weighed, records saved to disk through two power cuts, LoadScan volume linked, auto-start on boot, remote support working. The build you see here (Slip App, plate reader, AI) runs on NODE4 and gets folded onto the site node. So we are extending a working system, not starting one.
The live transaction we are building toward
Truck arrives
Plate read (ANPR)
Weigh in / out
Ticket prints
Slip to app
Boom opens
The stages, in order
0
Weighing core — DONE & live
Indicator → Scale Reader → console → saved records, on the site PC. Keep it exactly as it runs.
LIVE
1
Harden the power & the PC
The two things that actually stopped weighing were power cuts and the indicator losing power. Fix these first or nothing else matters.
SITE
Put the indicator and the site PC on a UPS (battery backup) — two power cuts in two days switched the PC off.
Site
Set the PC BIOS to auto power-on after a power cut so it recovers unattended.
Site
Change the remote-access password used during setup; no phones charging on the weighbridge PC.
Site
2
Cloud-hosted, with the site as the capture point
The site PC keeps capturing live weights (so weighing never depends on the internet), and a small sync agent pushes every ticket and slip up to a CLOUD backend. The PWA and reports are served from the cloud on a normal web address — so you open it from ANY phone or laptop, anywhere, anytime, with just a login. No Tailscale, no logging on to the node.
NEXT
Stand up a cloud host (hosted server + database) running the Smart Weighbridge backend and the PWA, on your own domain with HTTPS (e.g. slips.yourcompany.co.za).
Geologix
Put a sync agent on the site PC that sends each finished ticket + slip to the cloud the moment it happens, and queues and catches up if the line drops — nothing is lost, weighing keeps working offline.
Geologix
Real accounts in the cloud (driver / client-admin / super-admin) so any device opens the same login from anywhere — the node is only the capture point, never the thing you log on to.
Geologix
3
The booms — physical control
The boom only lifts on a valid, completed transaction, with safety sensors so it never drops on a truck.
SITE + US
Install the boom gate(s) on the lane(s) with a loop/safety sensor so the boom knows a truck is under it.
Site
Fit a relay / IO controller (network or USB relay board) between the node and the boom motor.
both
Console logic: boom opens when the ticket is complete and printed, closes after the truck clears the sensor. Manual override button for the operator.
Geologix
4
Cameras & plate reader (ANPR)
Automatic truck ID at the lane, tied to the ticket and the driver — and CCTV evidence per weigh.
US + SITE
Mount an ANPR camera on the boom lane; the plate reader (already built) IDs the truck and auto-fills the ticket/driver.
both
Point the existing CCTV/NVR cameras at the bridge so each weigh has a photo for the record.
Site
Fix the LoadScan lane (markings + driver briefing) so the volume scans actually pass — 165 of 182 failed on commissioning.
Site
5
The Slip App + real logins — live on the node
Wire the driver Slip App to the live console database, replace the one shared login with real per-person accounts.
US
Run the Slip App on the on-site node, served on the site network + secure remote; a finished ticket prints AND pushes the slip to the driver's phone.
Geologix
Create the real accounts: one login per driver (own slips), client-admin per transporter (their company only), company super-admin (read-only, all). Replaces the single shared login.
Geologix
Turn on report export (Excel / CSV / PDF) and per-slip PDF for the office.
Geologix
6
On-site commissioning — go-live test
Prove the whole chain on the real lane before it carries live traffic.
BOTH
End-to-end run: truck → plate read → weigh in → load → weigh out → ticket prints + pushes to the app → boom lifts → record saved.
both
Test every role login, a power-cut recovery, and the boom safety stop.
both
Sign-off + operator training; then it carries live traffic.
both
7
Roll out the other lanes
Once lane 1 is proven, repeat for the other weighbridges (the design covers four scales across two areas).